Fully Automatic Egg Incubator and Hatcher for Chickens, Ducks, Geese, Birds

The JAEDO egg incubator comes with a comprehensive set of accessories, including: 1. Egg incubator 2. User manual 3. Product introduction booklet 4. 1.5m power cord 5. Grid board 6. Roller 7. 0.55m battery connection wire 8. Water supply base (excluding water bottle)

Frequently Asked Questions:

Q: Why is the hatching grid not flat? A: The hatching grid is designed to be slightly raised in the middle. When hatching eggs, please remove the hatching grid first, then replace it with the roller after the chicks have hatched. The hatching grid and roller cannot be used simultaneously.

Q: How do I know if the incubator is turning the eggs? A: The egg tray is easily visible from the side of the incubator. You can also press the "+" and "light" buttons in succession to test the egg-turning function. Alternatively, you can restart the machine by pressing the "+" and "-" buttons simultaneously. You can also mark an egg with a pencil and periodically check if the marked side has moved.

Q: How do I adjust the temperature or humidity? A: The machine has 4 preset modes (chicken, duck, goose, pigeon) with fixed temperature and humidity settings that cannot be changed. The temperature and humidity can only be adjusted in the constant temperature mode. After setting the temperature, the machine will automatically control it, and no further action is required. The humidity function is a monitoring feature - the machine will not automatically control the humidity, but will only sound an alarm when the data is abnormal, prompting you to manually add moisture. You can refer to the instructional video on the product page for guidance on setup and operation.

Q: Can the three layers be separated and used individually? A: Yes, you can use only one layer, or you can use two or three layers simultaneously. When using multiple layers, opening the lid will affect all the eggs hatching at the same time. You can decide whether to use one layer or multiple layers based on the number of eggs you need to hatch.

Q: What should I note when installing the water supply system? A: After connecting the water supply base to a water pipe, insert the other end of the pipe into the machine's water inlet. Prepare a regular mineral water bottle, fill it with water, install it on the water supply base, and invert it on the desktop at the same level as the machine. If the water does not automatically flow into the machine during the initial setup, you can manually and slowly squeeze the water bottle to allow it to flow. Thereafter, the water will automatically replenish due to gravity.

The JAEDO egg incubator is available in four sizes - Small (120 eggs), Medium (64 eggs), Large (192 eggs), and Extra-Large (112 eggs) - to accommodate different hatching needs. The machine is made of PC+ABS material, operates on 100V-120V/50-60Hz power, and consumes less than 60W. The temperature range is adjustable from room temperature to 40°C (±0.1°C). The roller design allows for adjustable shaft spacing to suit different egg types, and the 360° rotation ensures reliable performance. The built-in egg candler facilitates easy egg checking throughout the hatching process. The dual power supply feature allows the use of either household power or a 12V battery, ensuring uninterrupted operation even during power outages.

product information: